Quick Answer: Can A Fiberglass Pool Be Resurfaced?

How often do you have to resurface a fiberglass pool?

Years go by and even with regular upkeep, eventually pools start to break down.

In the case of fiberglass pool resurfacing, the common wisdom is they should last 25 years if you apply 2 coats for the best fiberglass pool resurfacing..

Can you paint a pool without draining it?

Let’s start by dispelling a few Myths about pool painting… You don’t have to drain your pool before painting – Ha!, not sure where this started but it is absolutely False! Of course, you have to drain your pool, in fact, the drier it is the better because the paint will adhere better.

What is the best color to paint a swimming pool?

Sapphire Blue is one of the more traditional picks for an inground pool color. This royal blue gelcoat has a diamond shimmer that adds just enough sparkle to set it apart from standard blue pools.

How much does it cost to resurface a 10 000 gallon pool?

The average cost for this is $10,000–$20,000. The cost depends on multiple factors: Condition of the pool. Area of the country.

Can you use enamel paint on fiberglass?

Paint Type. … Enamel paints can be applied to virtually any surface — wood, fiberglass or metal — provided that proper preparation is carried out.

Can you repaint a Fibreglass pool?

Epoxy pool paint is the only suitable material to paint a fiberglass pool. Buy enough to paint two coats for a long lasting finish. Measure your pool carefully to add up all the surface area of the floor, walls and steps, then buy more than enough Epoxy pool paint to cover the surface, twice.

What are the disadvantages of a fiberglass pool?

List of the Cons of Fiberglass PoolsPoor installation practices can impact the quality of your pool. … The fiberglass can interfere with the quality of the water. … There is still a significant cost to consider when installing a pool. … Fiberglass pools are prefabricated. … The fiberglass can be susceptible to warping issues.More items…•

What causes fiberglass blisters?

Fiberglass blisters occur because water passes through the gelcoat. Water soluble chemicals inside the laminate exert an osmotic pull on water outside, and some water molecules find a way through the gelcoat. As more water is attracted into the enclosed space, internal pressure builds.

Can you change color of fiberglass pool?

A fiberglass gel, available in many colors, is applied to the inside of a pool and it serves to change the color of the pool as well as to protect the inside of the pool. If you have an old fiberglass swimming pool you can resurface it with this fiberglass gel.

How thick is a Fibreglass pool?

How fibreglass pools are manufactured. These fibreglass materials is approximately around three-eighths inches in thickness that means layers upon layers of fibreglass are attached to each other to form a strong fibreglass pool. A fibreglass pool has to be constructed from a mold in the factory.

How long do Fiberglass pools last?

30 yearsWith a fiberglass pool, you do not need to be concerned anymore. When it comes to durability and strength, fiberglass pools come first. They are made with high tensile fiberglass that accommodates ground movement without cracking or damage. A fiberglass pool can last up to more than 30 years.

What is the downside of fiberglass pools?

Fiberglass Pools: The Cons The cons associated with fiberglass pools are primarily related to cost and installation issues. … Poor Installation — Because fiberglass pools are delivered as a pre-manufactured shell, it’s important that your contractor follows proper procedure when installing the pool.

Is a fiberglass pool worth the money?

While they cost you a bit more up front than a concrete pool, they make up for it by requiring low maintenance. You won’t have to replaster a fiberglass pool like you would with concrete, and you don’t have to worry about replacing any vinyl. But even better, fiberglass pools actually save you money.

Can you’re gelcoat a fiberglass pool?

If manufactured correctly and maintained properly, a fiberglass pool gelcoat will never need to be refinished.

Can you resurface a Fibreglass pool?

Resurfacing Options One of the best options for resurfacing your fibreglass swimming pool is to apply a new interior coating of fibreglass. Fibreglass coatings are incredibly strong and they are flexible as well, so they can easily withstand any movement in a swimming pool without cracking or chipping.

How do you fix fiberglass pool blisters?

The repair procedure is to drain the pool, sandblast the interior, grind out the blisters and add putty to the affected area. A new mat of fiberglass is applied, and a vinylester resin reseals that mat before a new gel coat is put on.

Is painting your pool a good idea?

When it comes to durability, both plaster and pool paint are built to hold up against the chemicals in your pool and natural conditions outside of it such as harmful UV rays; however, most pool plaster lasts 15-20 years, while epoxy pool paint – the longest-lasting type of pool paint on the market – needs to be …

Who makes the best fiberglass swimming pools?

Top 10 Fiberglass Pool ManufacturersBlue Hawaiian Fiberglass Pools. … Leisure Pools. … San Juan. … Sun Pools. … Tallman Pools. … Thursday Pools. … Trilogy Pools. … Viking Pools. According to their website, Viking Pools has plant locations in West Virginia, California, Texas, Florida, North Carolina, Tennessee, Louisiana, and Illinois.More items…•

Do fiberglass pools look cheap?

So yes, fiberglass pools can look cheap, especially older ones, but they don’t have to. When properly built and properly installed, a fiberglass pool will be a thing of beauty.

What causes cobalt stains on fiberglass pools?

The Cobalt comes from osmosis of the gel coat which leaches some of the Cobalt catalyst from the fibreglass (polyester) resin. Osmosis is also characterised by blisters at the site of the black spot. Organic stains – From Algae growth, leaf stains or dirt washed into the pool and left longer than a week.